Rotating Partition with Mechanism CPL European Oak

This partition divides a room into zones without closing it off. All the slats turn together, so a single movement opens them to let light and views through, or closes them when you want more privacy. It works well in a living room, bedroom, hallway, office, reception area or shop.

How the mechanism works
The slats turn in groups, like a Venetian blind, rather than one by one. They rotate through 120°. When closed, a gap of about 1 cm remains between them. The number of mechanisms depends on the width:

51–115 cm: 1 mechanism
123–219 cm: 2 mechanisms
227–275 cm: 3 mechanisms

Material and finish
The slats are made of high-density MDF and wrapped on all four sides in a seamless finish, so the partition looks just as neat from either side. No painting or further finishing is needed.

Dimensions
Slat cross-section: 30 × 70 mm
Gap between slats: 50 mm
Width: 29 sizes from 51 to 275 cm in 8 cm steps (510, 590, 670, 750, 830, 910, 990, 1070, 1150, 1230, 1310, 1390, 1470, 1550, 1630, 1710, 1790, 1870, 1950, 2030, 2110, 2190, 2270, 2350, 2430, 2510, 2590, 2670, 2750 mm)
Height: made to order, up to 2750 mm. The partition should be 0.5 cm lower than the floor-to-ceiling height.

Benefits
Divides a space without a permanent wall
All the slats turn at once, so there’s no need to adjust each one
Even when closed, a narrow gap remains, so the room doesn’t go dark
Finished on all four sides, so it looks good from every angle
Suitable for homes, offices and commercial spaces

Need a different height, width or number of slats? Email us at info@moonavoor.ee
Colours may look different on screen. You’re welcome to see samples in our showroom.