How to Install Skirting Boards

Skirting boards protect the wall from knocks and the mop and cover the gap between the wall and the floor. Our skirting boards (made by Mardom Decor) are made from moisture-resistant PolyForce polymer, and most of them have a ScratchShield surface that stands up well to scratches. That makes them a good choice for kitchens, hallways and bathrooms too.

Before you start

  • Fit skirting boards only once the floor is finished.
  • Leave them in the room for at least 24 hours before fitting.
  • The wall must be dry, clean and dust-free.
  • Think about cables in advance. Some skirting boards have a cable channel at the back where wires can be hidden.
  • If you'd rather not remove your old skirting, choose a skirting cover that fits over the existing board (for example MD005).

Tools

Use a mitre saw with a fine-tooth blade made for plastics and laminate. The right blade is the key to success: the ScratchShield surface is hard, and a coarse blade will chip its edge. A corner cut in a wooden mitre box won't be accurate, and skirting corners are among the first things people notice in a room.

You'll also need a tape measure, a pencil, a caulking gun, a damp cloth and masking tape.

Which adhesive to use

  • Mardom Fix Max is the best choice for skirting boards. It grabs almost instantly and holds even on uneven and low-absorbency walls (such as tiles or gloss paint) and in damp rooms.
  • Mardom Fix Pro is suitable if the wall is dry and made of plaster, plasterboard, wood or concrete.
  • Mardom Fix Extra is for the joints and corners between lengths.

Step by step

  1. Start with the internal corners. Cut the corners at 45°. On a straight run, butt the lengths together with a square cut.
  2. Apply mounting adhesive to the side of the skirting that sits against the wall, in a continuous bead or closely spaced dots.
  3. Glue the skirting to the wall only, never to the floor. Laminate and parquet move as the temperature and humidity change. If the skirting is glued to the floor, gaps will open up between the skirting and the wall.
  4. Apply Fix Extra joint adhesive to the whole cut face at all joints and corners.
  5. Press the skirting against the wall and slightly down towards the floor, and wipe off any excess adhesive straight away with a damp cloth.
  6. Leave the adhesive to dry for at least 24 hours.
  7. Fill the gap between the top of the skirting and the wall with acrylic caulk. Don't caulk between the skirting and the floor.

Painting

  • Primed skirting boards can be painted once the adhesive has dried. Use a water-based acrylic paint in two thin coats and mask the wall along the top edge of the skirting.
  • Premium skirting boards (with a P in the product code) have a factory SupremeSatin finish and don't need painting. Apply a thin coat of SuprimeSatin masking varnish to the joints and corners with a foam roller or sponge, and the joints will blend into the surface.

You'll find skirting boards, corners, adhesives and varnish in the Skirting and Adhesive/Accessories sections of our online shop. Feel free to ask us for advice in the showroom too.